Kinetic hydrate inhibitor INIPOL® AH 23
TU 2458-111-53501222-2015
INIPOL® AH 23 is water-soluble kinetic hydrate inhibitor specially designed to prevent gas-hydrate deposits formed in gas, gas-condensate and oil wells and in pipelines.
Kinetic hydrate inhibitorINIPOL® AH 23 is available in two grades INIPOL® AH 23 grade A and INIPOL® AH 23 grade V and is a solution of organic polymers in solvent.
Application Area
-
Protection of oil field equipment from hydrate deposits.
-
Protection of oil, gas and gascondensate wells from hydrate deposits.
Properties
INIPOL® AH 23 grade A |
INIPOL® AH 23 |
|
Appearsnce at 20 °C |
Liquid with the color varying from light yellow to brown |
|
Specific gravity at 20 °C (68 °F), g/cm3, within the range |
0.85-0.90 |
0.79-0.87 |
Kinematic viscosity at 20 °C (68 °F), mm2, not more than |
10 |
5 |
pH of the product |
8-12 |
|
Freezing point |
Minus 50 °C (Minus 58 °F) |
Minus 50 °C (Minus 58 °F) |
Solubility in water |
Soluble in water at any rate |
Soluble in water at any rate |
Solubility in hydrocarbons |
Soluble in aromatic hydrocarbons |
Soluble in aromatic hydrocarbons |
Customer Benefits
-
High efficiency of hydrate inhibitor allows to decrease its consumption.
-
Hydrate inhibitor is compatible with other types of chemical products applied at oil & gas production.
-
Hydrate inhibitor is stable at high temperatures and high pressure.
-
Low freezing point of the inhibitor.
-
Solubility in water at any rates.
Consumption & Process Technique
In case injected continuously into the system, pure non-diluted product INIPOL® AH 23 may be injected directly into the system by means of a dosing pump.
The injection rate of INIPOL® AH 23 depends on the required result and on the conditions of application (subcooling level, time of injection). Normally satisfactory results can be achieved at consumption rates ranging from 0.5 % to 2 % in terms of the water being transported.
To obtain more detailed information about the chemical, determining its optimal consumption for the particular application and on the possibility of organizing laboratory tests, please contact the specialists of Sales & Service Department of POLYEX Company.
Packing
INIPOL® AH 23 is delivered in PE drums of 190 kg net and in PE containers of 1 m3.
INIPOL® AH 23 produced according to the technology and from the materials provided by the company of ARKEMA FRANCE.