Заголовок сайта

+7 (342)
253-01-60
253-02-12

Order a call  

  Polyex   |   Services & Technologies   |   Products   |   Order a product   |   Contacts  
Services & Technologies
  Hydraulic fracturing  
  Fresh well completion after drilling  
  Enhanced oil recovery  
  Improving and enhancing the injectivity of injection wells  
  Water influx protection & well injectivity leveling  
  Non-damaging completion & killing of wells  
  Dissolving and preventing asphaltene wax and paraffin deposits  
  Washing off the oil film/process liquids  
  Inhibiting  
 
Products
  Fracturing fluids
SURFOGEL® grade D type 20-40
SURFOGEL® grade D type 40-70
SURFOGEL® grade D type 70-100
 
  Acidic compositions for stimulation of the wells
KSPEO-2
KSPEO-4
KSPEO-2N
Inhibited Hydrochloric Acid for Oil-and-gas Industry
FLUXOCOREР® 210
Modifier for Acidic Compositions МК-Р
Modifier for Acidic Compositions МК-7
Modifier for Acidic Compositions МК-8
 
  Gelling agent
SURFOGEL®
 
  Clay & polymer destructors
FLUXOCORE® 110
KDS-1
 
  Brine fluids for completion and killing of wells
TZhG
TZhS
 
  Surfactants for non-damaging completion and killing of wells
GF-1
 
  Emulsion compositions
EKS-EM
TAMOLEX®
EMITRIT
 
  Inhibitors
Paraffin Deposit Inhibitors
PROCHINOR® AP 104
PROCHINOR® AP 07
Scale Deposit Inhibitors
INIPOL® AD 32 K
DESCAVENT
СО2 & H2S Corrosion Inhibitor
NORUST ®760
NORUST® 9805
HCl Corrosion Inhibitor
SOLING
Nitrogen Acid Corrosion Inhibitor
NAYTING
Hydrate Inhibitors
INIPOL AH 23
POLY-INGYD
 
  Oil film washing off compositions
POLYPAV
 
  H2S scavengers
PS-1 PS-2
PS-4
 
  Solvents
NEFRAS-M
 

Surfactant additive GF-1 for Non-damaging Brine Fluids for Killing of Wells

Technical Requirements TU 2482-054-53501222-2015

Purpose of Use

Concentrated modifying surfactant additive GF-1 is designed for the application in clear brine fluids and water-based process liquids to make completion and killing operations be a non-damaging process for the effective drainage area of formation.

Concentrated additive GF-1 is available in grade M and grade K and depending on the grade is liquid solution of surfactants with different concentration of active substance and different freezing point.  

Application Area

  • Completion and killing of wells before the maintenance and repair operations connected with preventive repair of the wells, well-workover operation, EOR works.
  • Pre-conservarion  well-killing operations.
  • Process liquids for washing the wells and driving treatment fluids.

Properties

GF-1 grade M is low combustible fluid with the color varying from transparent to light brown,   with the concentration of active material up to 10 % and freezing temperature of minus 30 °C.

GF-1 grade К is  fluid with the color varying from transparent to light brown,  with the concentration of active material not less than 50 % (concentrated product) and with freezing temperature minus 10 °C. When being frozen the chemical becomes paste-like substance, but after it is heated again it restores its properties.  

The products are well soluble in water.

Customer Benefits

  • Preserving the producing ability of well after repair and maintenance operations due to low interfacial tension at oil and FG-1 solution border (See Picture 1 and Picture 2)

Picture 1. Filtration of oil through the sandstone after treatment with different water solutions

Picture 2. Influence of concentration of GF-1 on interfacial tension at the border of completion brine fluid and oil

  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  • Reducing of oil losses after the repair and maintenance work and eliminating of the costs connected with the long  period of well completion  and resumption of stable output of the wells after maintenance (the period of resumption of stable output shortens 2-4 times).
  • Reducing of residual water saturation of the rock changing the wettability of porous medium.
  • Preventing of forming the water film on the rock. 
  • Preventing of water-oil emulsion forming. 
  • Reducing of oil-field equipment corrosion.
  • High bacteria protection level from sulfate-recovering bacteria.
  • Absence of chlorine-organic compounds in the chemical, which may affect crude oil refining process.
  • Fluids modified with GF-1 are compatible with organic solvents used for asphaltene wax and paraffin deposits elimination as well as with mineral acids and mineral acid based fluids.  

Process Technique

Surfactant modifying additive GF-1 grade M and GF-1 grade К are supplied as liquid concentrates convenient for diluting in fresh or mineralized process waters.

The consumption of the additive depends on its grade and should provide the concentration of the active matter in the fluid of 0.1 %.

Consumption of GF-1 grade M is 10 kg per one cubic meter of water,  consumption of GF-1 grade M2 kg per one cubic meter of water. Surfactant modifying hydro-phobic additive GF-1 is added to clear brine fluids before the injection in the well.

The chemical is non-toxic and non-explosive. GF-1 grade M is stable at the temperatures under 90оС.GF-1 grade M is inflammable fluid.

To select the optimal design of application of tamol additive GF-1 it is recommended to contact the specialists of  Sales & Service Department of Polyex company.

Modifying surfactant additive GF-1 is certified for the application in oil-and-gas field.

  Press kits & articles   |   News   |   FAQ   |   Technological assistance   |   Careers  
2011-2018 © Copyright

Office 301, 8 Galperin street 614042, Russia
      +7 (342) 253-01-60, 253-02-12

Designed in Perm 
Webmasters Studio