Scale Deposit Inhibitor INIPOL®  AD 32 К

Technical Requirements TU 2458-079-53501222-2010

Purpose of Use

Inhibitor INIPOL® AD 32 K is scale deposit inhibitor specially designed to control hardly soluble deposits formed in the presence of sulfonates and carbonates, such as calcium carbonate, calcium sulfate, barium sulfate and strontium sulfate.

Application Area

  • Protection of  oil field equipment from scale deposit forming.
  • Protection of water linesfrom scale deposit forming.

Main Properties

Appearsnce at 20оС (68оF)

Liquid with the color from light-yellow to brown

Specific gravity at 20°C (68°F), within the range

1.15 – 1.22 g/cm3
(9.6-10.18 ppg)

Dynamic viscosity at 20°C (68°F), mPa•s, not more than

100 mPa•s

pH of 10-% water solution


Freezing point

Minus 30°C  (Minus 22°F)

Flash point

Not applicable

Solubility in water

Soluble in water at any rate

Solubility in hydrocarbons

Insoluble in hydrocarbons

Customer Benefits

  • Scale inhibitor is extremely stable in media with the wide range of pH.
  • Scale  inhibitor is compatible with stratum water at different rates of consumption.
  • Scale  inhibitor is compatible with other chemicals used in the process of oil recovery.
  • Scale  inhibitor is stable at high temperatures and high pressures.
  • The effectiveness of deposit inhibitor allows to decrease its consumption.
  • Low freezing point of the inhibitor.
  • Solubility in water at any rates.

Process Technique

INIPOL® AD 32 K is recommended for the constant dosing to provide the protection of oil field equipment and water lines.

INIPOL® AD 32 K is normally injected directly in the equipment system being protected by means of a dosing pump. It may be injected both in concentrated form and diluted with water.

The injection rate of INIPOL® AD 32 K depends on the conditions of the system being protected and on the properties of water being used.

INIPOL® AD 32 K consumption between 5 to 20 grams per 1m3 usually gives satisfactory results.

To select the optimal design of application and consumption of Scale deposit inhibitor INIPOL® AD 32 K it is recommended to contact the specialists of Polyex company.

Scale deposit inhibitor INIPOL® AD 32 K is certified for the application in oil-and-gas field.

INIPOL® AD 32 K is produced according to the technology and from the materials provided by the company of CECA, France, under license.

Return to the list