СО2 & H2S corrosion inhibitor POLY- INCOR® 365 grade 011


СО2 and H2S corrosion Inhibitor POLY- INCOR® 365 grade 011

TU 2458-112-53501222-2017

Inhibitor POLY-INCOR® 365 grade 011 is a water soluble corrosion inhibitor, which has been specially developed for the use in oil industry in order to ensure the protection against corrosion due to the presence of CO2 and/or H2S.

POLY-INCOR® 365 grade 011 is effective for infield flow lines, oil gathering, reservoir pressure maintenance systems and water utilization systems.

Properties
Grade  POLY-INCOR® 365 grade 011
Appearance at 20°C   Homogeneous liquid with the color varying
from light-yellow to dark-brown 
Specific gravity at 20°C,
g/cm3, within the range  
0.92±5%
Kinematic viscosity, mm2/s,
not more than
at 20°C
at minus 40°C   


20
500
Freezing point, 
not higher than 
Minus 50 °C
Solubility  Soluble in water. Non-dispersible in oil 
Conditions of application   For standard conditions
Customers Benefits 

  • High speed of protective film forming.
  • No emulsification is observed.
  • Stability of corrosion inhibitor at high temperature and high pressure.
  • High effectiveness of the inhibitor which allows to reduce the consumption of the chemical at treatment.
  • Compatibility of the inhibitor with other chemicals and materials. 
  • Low freezing point of the inhibitor.

Process Technique 

POLY-INCOR® 365 grade 011 inhibitor is normally injected continuously by a dosing pump.

The injection rate of POLY-INCOR® 365 grade 011 depends on fluid corrosiveness and is determined with laboratory tests.

For crude oil pipeline transportation systems consumption varies from 10 to 25 ppm, based on total fluid.

When applied in hole annulus of a well equipped with electric centrifugal pump, or for the downhole equipment protection the treatment must be performed periodically once per week or two weeks.

To obtain more detailed information about the chemical, determining its optimal consumption for the particular application or to organize laboratory tests,  please contact the specialists of Sales and service department of POLYEX, jsc. 

Packing 

POLY-INCOR® 365 grade 011 is delivered in steel drums of 227 dm3 capacity or in PE containers of 1 m3 capacity.

Corrosion inhibitor POLY-INCOR® 365 grade 011 is certified for the application in oil and gas industry.



To order
Return to the list