СО2 and H2S corrosion Inhibitor POLY- INCOR® 365 grade 021TU 2458-112-53501222-2017
Inhibitor POLY-INCOR® 365 grade 021 is a water soluble corrosion inhibitor, which has been specially developed for the use in oil industry in order to ensure the protection against corrosion due to the presence of CO2 and/or H2S.
POLY-INCOR® 365 grade 021 is designed to protect the oilfield equipment and pipelines, watered out oil gathering systems and RPMS at continuous injection. The inhibitor is effective under conditions of low watercut but stratified horizontal flow.
|Grade||POLY-INCOR® 365 grade 021|
|Appearance at 20°C||
Homogeneous liquid with the color varying
from light-yellow to dark-brown
Specific gravity at 20°C,
g/cm3, within the range
Kinematic viscosity, mm2/s,
not more than
at minus 40°C
not higher than
|Minus 50 °C|
|Solubility||Soluble in water. Non-dispersible in oil|
|Conditions of application||For standard conditions|
- High speed of protective film forming.
- No emulsification is observed.
- Stability of corrosion inhibitor at high temperature and high pressure.
- High effectiveness of the inhibitor which allows to reduce the consumption of the chemical at treatment.
- Compatibility of the inhibitor with other chemicals and materials.
- Low freezing point of the inhibitor.
POLY-INCOR® 365 grade 021 inhibitor is normally injected continuously by a dosing pump.
The injection rate of POLY-INCOR® 365 grade 021 depends on fluid corrosiveness and is determined with laboratory tests.
For crude oil pipeline transportation systems consumption varies from 10 to 25 ppm, based on total fluid.
When applied in hole annulus of a well equipped with electric centrifugal pump, or for the downhole equipment protection the treatment must be performed periodically once per week or two weeks.
To obtain more detailed information about the chemical, determining its optimal consumption for the particular application or to organize laboratory tests, please contact the specialists of Sales & Service Department of POLYEX Company.
POLY-INCOR® 365 grade 021 is delivered in steel drums of 227 dm3 capacity or in PE containers of 1 m3 capacity.
Corrosion inhibitor POLY-INCOR® 365 grade 021 is certified for the application in oil and gas industry.